RB960PGS-PB
The PowerBox Pro is an outdoor five gigabit ethernet port router with PoE output on four ports.
Since the device has a weatherproof outdoor case, you can mount it on a tower, or in other outdoor
locations.
It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other
PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to
worry about! It can power 802.3at and af mode B compatible devices, if 48-57 input voltage is used.
RBLHG-5HPnD-XL
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed.
The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
We have two versions available.
LHG XL HP5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
LHG XL HP5 (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
RBLHG-5nD
The LHG 5 is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.
The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
We have two versions available.LHG 5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.LHG 5 (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
RBLHGG-5acD-XL
The Light Head Grid (LHG) is a compact and light wireless device with an integrated dual polarization grid
antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances.
Several models are available with standard power, high power and even the XL with a higher gain and larger
grid. The grid design ensures protection against wind, and the fact that the antenna element is built into the
wireless unit means no loss on cables
RBwsAP-5Hac2nD (wsAP ac lite)
The wsAP ac lite is a perfect access point (AP) for hospitality networks (hotels, shopping malls, hospitals, airports etc.). It has an unobtrusive case that fits in standard wall power sockets. This way, the unit doesn’t attract attention and blends into any environment.
The wsAP has three Ethernet ports: one on the back side for easy PoE-in, and two LAN ports behind the front door. The device provides Dual concurrent 2.4 GHz and 5 GHz WiFi coverage, it supports 802.11ac, as well as legacy standards. A USB 2.0 port is provided, to charge mobile devices or for storage.
The device also has a pass through telephone jack (RJ11) to connect a desktop phone in a hotel room, for easier cable management. As a separate accessory you can order a special screw set (product code K50), that ensures the bottom door can only be opened by the owner. Mounting bracket fits US and EU most popular telecomunication sockets.We have two versions available.
- wsAP ac lite-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- wsAP ac lite (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
RTT Foundation
The RTT Foundation is a reinforced concrete structure specifically designed to support rooftop telecom towers. Constructed on-site to adapt to varying rooftop conditions, this foundation provides robust stability and secure anchoring for 3-leg rooftop tower structures while ensuring minimal impact on the host building.
S-RJ01
S+AO0005
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
S+RJ10
This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware.S+RJ10 module is supported also on devices with passive cooling, but may require an extra cooling.The latest revision of S+RJ10 contains "/r2" by the end of serial number. It comes with following improvements:- Jumbo frames up to 10218 Bytes are now supported for rates 2.5Gbps, 5Gbps and 10Gbps;- Link speed reporting is fixed - actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly;- DDM monitoring (Supply Voltage, Module temperature) is now supported.
Splicing Machines 33S
Elevate your network capabilities with the Fujikura 33S (Fujikura Splicing Machines), now available through Keith Electronics in India. This cutting-edge solution combines precision, speed, and durability, redefining the standards for splicing technology. Its intuitive touchscreen interface simplifies the process, ensuring top-quality connections in record time. With advanced connectivity options and robust construction, the Fujikura 33S is your gateway to seamless connectivity and a reliable network infrastructure. Contact Keith Electronics today to experience the future of splicing technology.
Splicing Machines 43S
Elevate your connectivity game with the Fujikura 43S (Fujikura Splicing Machines), now available through Keith Electronics in India. This innovative solution combines precision, speed, and adaptability to redefine the standards of splicing technology. The Fujikura 43S simplifies precision and rapid splicing, offering advanced connectivity options and a robust build to enhance your network capabilities. Contact Keith Electronics today to experience the future of splicing technology.
Splicing Machines 48S+
Fujikura 48S+ is a high-end fusion splicer designed for FTTx, data center/LAN, and access networks. It has advanced features, including active V-Groove alignment, fast splicing time, and compatibility with various fiber types. It’s compact, durable, and has an easy-to-use interface with a 5-inch color LCD touchscreen.
